Posts tagged Dodge Charger
We were given a wonderful opportunity to team up with the Make-A-Wish Foundation of Minnesota this past January when we heard about Matthew’s wish to have his 1968 Dodge Charger restored. And after over 5 months of hard work, Matthew’s Charger is finally complete. We felt this partnership was a great fit and couldn’t wait to help out, so on January 12th, we set off for Northern Minnesota to pick up the car and see what kind of shape it was in.
You can imagine Matthew’s excitement when he found out we were there to grant the wish that he had patiently been waiting over a year for. We trailered the Charger back to our Minnetonka Ford store where we immediately began with a mechanical evaluation. We made sure to document the process of the restoration through a series of blog posts with videos and photos. You can check it out here. The story created a lot of buzz throughout the community and we were excited to be able to share it with everyone. We soon realized the amount of dedication and compassion that is present within the Morrie’s community amongst employees when they began volunteering their time and energy to help with the restoration.
It has been a long and rewarding process to help make Matthew’s wish come true and we were so thrilled to be able to finally surprise him this past weekend when he was least expecting it. We planned to have Matthew and his family visit for the weekend to tour a few of Morrie’s vehicles. He had no idea that towards the end of his tour, he would find his 1968 Dodge Charger, fully restored and finally complete. We held a small event with members of the Make-A-Wish Foundation, Morrie’s employees and vendors that worked on the restoration, and Matthew’s family.
The following morning, Matthew got to show his new Charger off at MN C&C , a car event that Morrie’s sponsors the first Saturday of each month throughout the summer. Matthew’s Charger looked great amongst all the other classic and exotic vehicles at the event and sure got a lot of attention. Stay tuned for a separate blog post highlighting the June C&C event and a special segment featuring Matthew’s appearance.
With over 600 hours of work, more than 40 employees, and a dozen different vendors, Matthew’s wish finally became a reality. All the time and hard work paid off when we all saw the look on Matthew’s face Friday night when he first laid eyes on the car. We were so proud to be able to work with the Make-a-Wish Foundation to help make this wish come true and we truly appreciate the opportunity to give back to our community and a great family like Matthew’s.
After almost 5-months of hard work, the 68′ Dodge Charger is finally complete! We are very excited to unveil the vehicle tonight and can’t wait for Matthew’s reaction when he see’s the finished product. If you have been following our blog you know that we teamed up with The Make-A-Wish Foundation of Minnesota to help grant Matthew’s wish of having his 1968 Dodge Charger restored. We were happy to be able to work together as a group to make Matthew’s wish come true. Stay tuned for coverage of the reveal. If you would like to see the car in person join us bright and early at the Automotorplex tomorrow for MN Cars & Coffee!
Spring has finally arrived, and much like we’ve been eagerly waiting to get outdoors, the Charger is anxiously waiting for its return to streets. That return, however, is going to be a bit delayed.
Up until recently visible progress on the Charger could be seen on a daily basis, but recently our team has been working diligently on the details you cannot see. We’ve reached the stage where the hunt for small and seldom noticed trim pieces slows down the restoration process. Despite a healthy aftermarket for vintage muscle car parts, we’ve run into a couple of “needle in the haystack” situations.
The good news is that we’ve been able to track down all the outstanding parts. The not so good news is that some of these parts aren’t scheduled to arrive until the middle of June. Needless to say we won’t hit our May completion target and it’s looking like late-June is a more reasonable completion target. Fortunately, like the aging of a fine wine, the extra time will give us time to get everything dialed in perfectly for when Matthew takes the wheel this summer.
Check out the update photos below and be sure to check back often for updates.
We’ve had Matthew’s 1968 Dodge Charger for a little over three months now and things are really coming together. Since our last update, the Charger has made it back to Morrie’s Minnetonka Ford for assembly. Upon arrival the first order business was to remove all the suspension components for refinishing. After stripping and a fresh coat of paint the suspension was put back in the car, complemented by new shocks and other goodies. The brakes were also tackled and rebuilt to as new condition, although it is hard to notice them hidden behind the shiny new American Racing Torque thrust wheels. Under the hood the refreshed engine and transmission has been put back in the car and the generous folks at A&T Upholstery have started tackling the interior.
The car has really started to take shape and with spring around the corner the timing couldn’t be better. We still have a lot of work ahead, but with a little luck, and a lot of elbow grease, the car should be ready before June rolls around.
We’ve been hard at work restoring Matthew’s 1968 Dodge Charger and we’re excited to share the latest updates with you. The charger is currently at our body shop in Brooklyn Park where it just received a fresh coat of paint! Per Matthew’s request, we painted the vehicle Mopar Silver, and we think it was a great choice. The vehicle is slowly but surely starting to look as good as it did the day it rolled off the showroom floor. We are very excited to see Matthew’s reaction once the Charger has been fully restored.
The vehicle is currently getting upholstered and once that is finished we will begin the assembly process. Make sure to stay tuned for more coverage! Until then, take a look back on all of our restoration updates to see the progress we’ve made so far.
Here at Morrie’s we are proud to be able to give back to our local community and help others. When we found out about the opportunity to team up with the Make-A-Wish Foundation to grant Matthew’s wish of having his 1968 Dodge Charger restored, we were thrilled. Earlier this year we traveled North to Canyon, Minnesota to surprise Matthew at his home and pick up the Charger. Throughout the restoration we have documented the different phases of the project through a series of posts here on our blog. Just recently, Hemmings.com, a notable online car enthusiast community featured Matthew’s story and the process of the restoration on their blog. Check out what they had to say at blog.hemmings.com.
To see the progression of the restoration process from the beginning, check out our series of blog updates here. Make sure to check back soon for update #5 where Matthew’s Dodge Charger receives a fresh coat of paint!
Yesterday we had the opportunity to meet with Aristea Brady from WCCO Channel 4 news and share the story of Matthew’s Charger restoration. Take a minute to watch the video below and get up to speed on all the latest details.
We’re excited to announce that thanks to the generosity of one of our employees, Matthew’s 1968 Dodge Charger will be sporting original Minnesota license plates from 1968. These plates have just the right amount of patina and will look right at home on the Charger. Many thanks to Jeff Nelson, one of our sales associates at Morrie’s Brooklyn Park Nissan for making the donation.
On the restoration front things are coming along nicely. As is often the case with restorations, things tend to take longer than expected. Although our last update said we were almost ready for paint, our team found a couple of areas that were not up to their high standards. This week they are putting the finishing touches on the car before final primer and paint gets applied. At this stage of the game there is a fair amount of sanding, welding and adjusting going on, which doesn’t exactly make for exciting photos or videos. Rest assured we will be getting plenty of photo and video footage when the final paint gets applied early next week.
Stay tuned for another update early next week.
We are proud to be able to partner with the Make a Wish Foundation of Minnesota to be able to grant Matthew’s wish of having his 1968 Dodge Charger restored. The vehicle has been at our Body Shop in Long Lake, MN for two weeks and just made the trek to our Brooklyn Park Body Shop for final preparation and painting. Per Matthew’s request, we will be painting the vehicle Mopar Silver. We expect the car to be painted by the week of the 18th and ready for assembly. We are very excited to see the restoration through and can’t wait to show Matthew the finished product! Check back often for updates and pictures. To read about the restoration from the beginning, check out our first blog post where you will see footage of us picking up the vehicle and surprising Matthew.
Since our last update there has been a flurry of activity on the 1968 Dodge Charger. To date the restoration has truly been a team effort. Upon arrival at Morrie’s Long Lake Bodyworks facility our team of 22 body technicians each enthusiastically volunteered to work on a particular body panel. In the images below you can actually see where each technician’s name has been written on the car to mark his territory. Each has been tasked with stripping, repairing, straightening and preparing their assigned part(s) for paint.
As they have dug deeper into it, the Charger is proving to be as clean as it originally looked. Rust has been almost wholly nonexistent and the dry California climate has really preserved the car nicely. This has certainly helped keep the schedule on track. In less than a week’s time much progress has been made and a number of panels are nearly ready for final paint. The team is shooting to have all the bodywork done and car delivered to our Brooklyn Park Bodyworks location by February 11th. From there the panels will be reattached and painting commence.
Stay tuned as the transformation process continues. We’re planning on getting some great photo and video footage of the painting and subsequent assembly processes.